Table of Contents
Advertisement
Using the scanner, how do I ...?
5. How do I Make a Copy?
5
.1 Copy Using the iJET Panel – The Basic Steps
Once the scanner is set up and configured to the needs and standards of your business, it
becomes as simple to use as a conventional office copy machine. By "setup and configured" we
mean that iJET Panel menu options such as original types and paper types are determined and
s
et.
O
n scanners:
T
o make a copy:
1. Load the original into the scanner.
See the section "How do I load originals?" for information regarding your specific
scanner model.
2.
Set the Size of your original
The value your set here determines the scan area. Usually this would be the size of the
or
iginal unless you wish only to input a portion. Press the Size button to activate size
setting.
Size
You then change the value each time you again press the Size button
or with the a
rrow up/dow buttons
NOTE: About the Size value: Size is a global system variable that can be changed in 3
different ways: 1. With the Size button
the Scan-to button > Size option. This means that when y
it will
also apply for a scan-to-file job and vise versa until you change it again.
3.
You can select Auto
original and set the scan area to the full original size. Press
Size
> Auto
4.
Apply
Copy Output Settings
The iJET P
anel offers quick buttons for common copy output settings. Apply one
these if needed. Otherwise, go to the last step where you start copying with the current
settings.
Lightness
Quality
Detailed Instructions on using each of these buttons plus other copy options
accessed through the Menu button follow in this "how do I...Make a Copy?" section.
n
.
2. With the Menu button > Size option and 3. With
detection or a standard size setting. Auto will detect the edges of the
Change the value (Auto or a standard size) and
Enter
press
to confirm.
Copies
Scale
ou change the size for a copy job,
Enter
to confirm your setting.
5-1
Size
or more of
Advertisement
Table of Contents
