Using the scanner, how do I ...?
4. Loading Originals for Copying and Scanning
4.1
How do I Load Originals into the Scanner?
O
n Scanners:
T
o load an original into the scanner:
1
. Open the lid backwards.
2
. Place your document, face down, on the glass plate. Align the document edges against the
alignment guide bar at the scanner's left side for a straight scan. Alig
with the center arrow marking on the alignment bar. You can
markings to position the original and measure its standard
3. Close the lid over the document.
Place the original face down on the glass plate.
4.
Loading Originals
On Scanners:
You can use manual loading or automatic loading. To select your loading method:
On the iJET Panel
1. Select
the Menu button.
2. Use the arrow buttons right/left until the iJET Panel displays Paper Setup and confirm with
the OK button.
3. Use the arrow buttons right/left until you reach
Open the scanner lid
M
enu
size.
Media Handling and confirm with OK
4-1
n the document middle
use the standard size