Contex AA51A Operator's Manual page 56

Using the scanner, how do I ...?
5.3. 3 How do I... apply the
You can give your copy sharper lines with the Sharpen option. The Sharpen filter identifies
edges in the image and intensifies them. You can use the Sharpen option with both Color
Copying and B&W Copying and with all original types. When set to ON, the option will apply th
Sharpen filter when you press either the Color Copy or B&W Copy button.
Color B&W
Copy Copy
To apply the Sharpen filter
On the iJET Panel –
Menu
1. Press the
2. Use the arrow up/down buttons
shows Sharpen as shown below.
Sharpen
>
OFF
Enter
3. Press to move the ">" marker down to indicate you want to change the Sharpen
setting.
Sharpen
> OFF
4. Press the arrow up
Sharpen
> ON
Enter
5. Press the
Menu level indicating that the value is set and you can step on through the menu options if
needed. The new Sharpen setting will be applied every time you press the Color Copy or
the B&W Copy button until you repeat the steps above to change it.
> Sharpen
ON
Sharpen filter?
button to enter the main Menu.
to move through the Menu options until the display
The ">" marker is down to the value level so you can
change the setting.
or arrow down button
button to accept the selected setting. The ">" marker will move up to the
The ">" marker is on the Menu level. You can continue
navigating the menu options with the arrow up/down
buttons.
to change the Sharpen setting
5-12
e