How Do I Make A Copy; Copy Using The Ijet Panel - The Basic Steps - Contex GX67D Operator's Manual

Using the scanner, how do I ...?

5. How do I Make a Copy?

5.1 Copy Using the iJET Panel – The Basic Steps
Once the scanner is set up and configured to the needs and standards of your business, it
becomes as simple to use as a conventional office copy machine. By "setup and configured" we
mean that iJET Panel menu options such as original types and paper types are determined and
set.
On scanners:
To make a copy:
1. Load the original into the scanner.
See the section "How do I load originals?" for information regarding your specific
scanner model.
2. Set the Size of your original
The value your set here determines the scan area. Usually this would be the size of the
original unless you wish only to input a portion. Press the Size button to activate size
setting.
Size
You then change the value each time you again press the Size button
or with the arrow up/down buttons
NOTE: About the Size value: Size is a global system variable that can be changed in 3
different ways: 1. With the Size button 2. With the Menu button > Size option and 3. With
the Scan-to button > Size option. This means that when you change the size for a copy job,
it will also apply for a scan-to-file job and vise versa until you change it again.
3. You can select Auto detection or a standard size setting. Auto will detect the edges of the
original and set the scan area to the full original size. Press
Size
> Auto
4. Apply Copy Output Settings
The iJET Panel offers quick buttons for common copy output settings. Apply one or more of
these if needed. Otherwise, go to the last step where you start copying with the current
settings.
Lightness Quality
Detailed Instructions on using each of these buttons plus other copy options
accessed through the Menu button follow in this "how do I...Make a Copy?" section.
.
Change the value (Auto or a standard size) and
Enter
press to confirm.
Copies Scale
Enter
to confirm your setting.
5-1
Size