To Make A Simple Copy; To Perform A Simple Scan-To-File; Operations On The Ijet Panel - Contex AA51A Operator's Manual

The iJET Panel

2.1 To make a simple copy

The following procedure for making a copy presumes the following:
•
The scanner and printer(s) are setup correctly as described in this Operator's guide.
•
The Size button option is set to Auto.
•
Options such as Lightness, Scale, Original Type, Quality and so on are all set to your
standard settings and the job does not require special adjustments.
1. Load the original
2. Press the Color Copy button for color jobs or B&W copy button for B&W jobs.
Color B&W
Copy Copy
or
For jobs that require adjusting the copy parameters, see the section "How do I make a Copy?"
See also relevant sections for setting up the system and setting options.

2.2 To perform a simple Scan-to-File

The following procedure for making a copy presumes the following:
•
The scanner is setup correctly with a local or network PC as described in this Operator's
guide.
•
The Size button option is set to Auto.
•
Scan-to button options such as Scan Mode, File Format, Resolution and so on are all set to
your standard settings and the job does not require special adjustments.
1. Load the original
2. Press the Scan to button and select a scan target. A (USB) target is a local PC.
Scan to
3. Press the Scan button to start the job.
Scan
For jobs that require adjusting the Scan to parameters, see the section "How do I Scan to File?"
See also relevant sections for setting up the system and setting options.

2.3 Operations on the iJET Panel

•
Turn the scanner power ON/OFF (Soft Power ON/OFF)
•
Make quick settings for Copying – Lightness, Quality, Copies (no. of..) and Scale.
•
Make additional high level copy settings through the Menu button.
•
Apply scanner and printer setup options through the Menu button - Advanced.
•
Apply personal and local preferences through the Menu button - Advanced.
•
Select a scan-to-file target through the Scan to button.
•
Make advanced scan-to-file settings through the Scan to button
•
Start a Copy (BW or Color) job.
•
Start a Scan-to-file job.
2-2