Remote Control - Bosch DVR-3000 Operator's Manual

DIVAR 3000/5000 Digital Video
Recorder
Status lights
Channel record
Hard disk
Network
USB port
7.1.3

Remote control

All functions controlled by the front panel and USB mouse can, alternatively, be accessed
using the supplied remote control.
The IR remote control allows control of up to 999 units without interfering with one another.
An ID number must be chosen on the remote control and in the system (see menu Setting >
General for setting a system ID for each unit).
To set the ID on the remote control:
1.
2.
3.
Figure 7.3: Remote control
See the following table for detailed information on each of the remote control buttons.
Bosch Security Systems
Symbol
1-16
Press the Add button on the remote control.
Press a number between 0 and 998 that corresponds to the unit ID you wish to control
(this unit will remain as the default until you select another unit with the Add button).
Press the Enter button to set the unit ID.
Function
A channel number is lit if the channel is recording.
Is lit if an installed hard disk has an error or is full.
Is lit if a user is connected to the DVR online.
Connect USB storage device or USB mouse to this port.
Operator Manual
Operating instructions | en
2013.05 | 1.0 | DIVAR 3000/5000 Digital Video
85
Recorder