System Requirements - Planex BLW–HPMM–U User Manual

1
4.Connect WAN Cable.
Connect the DSL or Cable modem to the WAN port on BLW-HPMM-U.
5.Power On.
Power the DSL or Cable modem on. At last, connect the adapter with
BLW-HPMM-U and plug the other side of the power cord into the power
socket. Power BLW-HPMM-U Wireless Router on. While detecting, the
Power LED and WAN LED will be on, and LAN LED and WLAN LED
will be blinking for a while and then the BLW-HPMM-U will be ready in
a short time.
Plug the AC Adapter which comes with BLW-HPMM-U in a
different voltage power supply will cause damage on BLW-
HPMM-U, and it is not included in warranty.

System Requirements

Windows, Macintosh, or Linux-based Operating System with an
installed Ethernet adapter.
Network cables. Use standard 10/100BaseT network (UTP) cables with
RJ45 connectors.
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either
of a DSL or Cable modem. (for WAN port usage)
To use the Wireless Router, all Wireless devices must be compliant with
the IEEE802.11g specifications.
8
BLW-HPMM-U