Planex BLW–HPMM–U User Manual page 10

1
Shared Internet Access All users on the LAN or WLAN can access
the Internet through the Wireless Router, using only a single external
IP Address. The local (invalid) IP Addresses are hidden from external
sources. This process is called NAT (Network Address Translation).
DSL & Cable Modem Support
10/100BaseT Ethernet port for connecting a DSL or Cable Modem. All
popular DSL and Cable Modems are supported.
PPPoE Support The Internet (WAN port) connection supports
PPPoE (PPP over Ethernet), Unnumbered IP with PPPoE & Multiple
PPPoE are also supported.
Dynamic IP Address On the Internet (WAN port) connection, the
Wireless Router support Dynamic IP Address (IP Address is allocated on
connection).
Configuration & Management
Easy Setup Use your WEB browser from anywhere on the LAN or
WLAN for configuration.
Remote Management The Wireless Router can be managed from
any PC on your LAN. And, if the Internet connection exists, it can also
(optionally) be configured via the Internet.
Network Diagnostics You can use the Wireless Router to perform a
Ping.
UPnP Support UPnP (Universal Plug and Play) allows automatic
discovery and configuration of the Wireless Router. UPnP is by
supported by Windows ME, XP, or later.
Wireless Features
Standards Compliant The Wireless Router complies with the
IEEE802.11g (DSSS) specifications for Wireless LANs.
Support IEEE 802.11g Wireless Stations The IEEE 802.11g standard
provides for backward compatibility with the standard 802.11g Wireless
stations.
Speeds to 54Mbps All speeds up to the 802.11g maximum of 54Mbps
are supported.
2
BLW-HPMM-U
The Wireless Router has a