Ping Toolkit - Planex BLW–HPMM–U User Manual

Name Enter the name of the application which you want configure.
Incoming Type
3
application type: TCP or UDP type.
Incoming Port Range Enter a port or a range of port to be the
incoming port. Once the trigger port is detected, the incoming packets
are allowed to pass the firewall to the specified incoming ports.
Trigger Type Scroll down the list to choose the trigger type: TCP or
UDP type.
Trigger Start Port Enter the starting port number as the starting
outbound port for the special application.
Trigger Finish Port Enter the finish port number as the ending
outbound port for the special application.
Enable Click the check box to enable the settings.
Apply and Reboot Click this button to save the setting and restart the
router.
Reset If there is anything wrong with the settings, you can click
Reset to configure the page again.

1.11 Ping Toolkit

This function can help you send Ping packets to detect if the remote
host is O.K. The response messages will appear below and they can also
help to diagnose the network problems.
68
BLW-HPMM-U
Scroll down the list to choose the incoming