System Requirements - Planex BLW-04EM User Manual

Item
Use this button to reset the power and restore the default factory
Reset Button
settings.
Fast Ethernet ports (RJ-45). Connect devices (such as a PC,
LAN Ports
hub or switch) on your local area network to these ports.
WAN port (RJ-45). Connect your cable modem, DSL modem, or
WAN Port
an Ethernet router to this port.
Connect the included power adapter to this inlet.
Power Inlet Warning: Using the wrong type of power adapter may cause
Power, WAN and LAN port status indicators. (See "LED
LEDs
Indicators" on page 2.)

System Requirements

You must have an ISP that meets the following minimum requirements:
Internet access from your local telephone company or Internet Service
Provider (ISP) using a DSL modem or cable modem.
A PC using a fixed IP address or dynamic IP address assigned via DHCP,
as well as a gateway server address and DNS server address from your
service provider.
A computer equipped with a 10 Mbps, 100 Mbps, or 10/100 Mbps Fast
Ethernet card, or a USB-to-Ethernet converter.
TCP/IP network protocol installed on each PC that needs to access the
Internet.
A Java-enabled Web browser, such as Microsoft Internet Explorer 5.0 or
above, or Netscape Communicator 4.0 or above installed on one PC at
your site for configuring the BLW-04EM.
Description
damage.
7