Ftpd Acl - Planex BLW–HPMM–U User Manual

4.3.2 FTPD ACL

3
You can set Access Control List on this page to deny those users who
have been put on the list to access FTP service. The rejected IP address can
be a single IP address or a network address that can be translated by DNS.
You can set to block 8 IP sources at maximum.
Enter Comment (description) for the users (up to 32 characters) and set
the IP address which you want to reject. After that, choose the subnet mask
for the rejected host and then click Add , and the host will be listed on
the Host Reject List page. If you want to delete a host from the Host
Reject List , choose the host on the list and then click Remove . The
rejected host will no longer on the list then.
96
BLW-HPMM-U