Radius - Planex BLW–HPMM–U User Manual

Cancel If there is anything wrong with the settings, you can click this
button to configure the page again.

3.7 RADIUS

You can set up additional parameters for connection with RADIUS server
on this page. However, you have to set the authentication methods as Open
System with 802.1x or WPA in the wireless security settings first.
Port You can appoint the UDP port which used by RADIUS server.
The default port number is 1812.
IP Address Enter the IP address of RADIUS server.
Password Enter the password provided by the ISP.
Save Click this button to save the setting and restart the router.
Cancel If there is anything wrong with the settings, you can click
Cancel to configure the page again.
Chapter 3 Advanced Setup & Configuration
3
87