Table of Contents
Advertisement
®
SuperLite
17B
simply placing a number of hours on the overhaul
schedule. All O-ring's, exhaust valves, and soft goods
should be replaced at least once a year. In between
overhauls the soft goods can be cleaned inspect and
reused providing a careful inspection reveals no
damage or deterioration. Again, logged questionable
previous diving environments will be determining
factor as well. The A2.1 checklist should be filled out
and retained in the maintenance files and provides
an excellent record of maintenance. All maintenance
should be annotated in the helmet log.
The Overhaul Checklist Procedure A2.1 is intended to
aid persons performing routine overhauls of KMDSI
SuperLite
Helmets and Band Masks. The checklist
®
should be used in conjunction with the applicable
Operations and Maintenance Manual for the model
helmet being serviced and is primarily intended to
guide and document the maintenance as it is com-
pleted. Specific detailed procedures for each section
of this checklist can be found in the Operations and
Maintenance Manuals. This checklist when completed
should be retained in the equipment maintenance files
and the helmet or mask log book should be updated.
The checklist's are intended to be used for all models
of KMDSI SuperLite
and KM Helmets and band
®
masks. All KMDSI helmet and band mask manuals
can be downloaded free at www.kirbymorgan.com.
52
© ⅯⅯⅩⅡ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 120613005
Advertisement
Table of Contents
