Table of Contents
Advertisement
Other features that are common to all Kirby Morgan
helmets include:
* Face port and retainer ring
* Communications components
* Oral nasal mask
* Nose block device
* Air train defogger
The Kirby Morgan 37 Commercial Diver's Helmet
represents what we at Kirby Morgan consider to be
a turning point in modern diving helmet design. The
helmet consists of two major assemblies: the helmet
shell/helmet ring assembly and the neck dam/neck
ring assembly.
The helmet comes with the large tube SuperFlow
350 adjustable demand regulator which provides an
easier breathing gas flow during peak work output.
A quick change communications module is available
with either bare wire posts or a waterproof connector.
The helmet ring houses the sealed pull pins and pro-
vides protection for the bottom end of the helmet. The
diver is also provided with an internally adjustable
chin support. This custom fit and balance seats the
helmet comfortably for long periods of time even
when working in the face down position.
The SuperLite
27
Commercial Diver's Helmet has
®
®
all the same features of the KM37 on a smaller, low
volume shell design. This helmet is often preferred
by persons with smaller heads.
The chrome plated machined brass helmet neck ring
houses the sealed pull pins and provides protection
for the bottom end of the helmet. Like the SL-17K,
37 and 17C, the diver is provided with an internally
adjustable chin support. This support, along with the
adjustable neck pad on the locking collar, gives the
diver a comfortable, secure, custom fit.
The quick-change communications module, available
with either bare wire posts or a waterproof connector,
allows for easy, efficient maintenance of the helmets
communications.
The helmet also features the SuperFlow
tube adjustable demand regulator. The helmet is
available in the umbilical over the shoulder, "B"
configuration only.
© ⅯⅯⅩⅡ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 120613005
®
The Kirby Morgan 47 offers the ultimate in a high
performance breathing regulator. This helmet has an
entirely new breathing system, oral nasal mask, and
water ejection system. The REX Demand Valve, with
it's fully adjustable balanced piston is a breakthrough
design that exceeds the requirements of all govern-
ment or other testing agencies.
It has the best work-of-breathing performance when
compared to ANY other commercial diving helmet.
The Kirby Morgan 47 Dive Helmet has been tested
and meets or exceeds European CE requirements and
350 large
®
is fully commercially rated. In all other respects, this
helmet is nearly identical to the Kirby Morgan 37.
SuperLite
SuperLite
27
®
®
approved and
Kirby Morgan 47
approved and
®
17B
™
marked
™
™
marked
™
5
Advertisement
Table of Contents
