Table of Contents
Advertisement
®
SuperLite
17B
Never use the helmet without first completing all pre-dive maintenance and set up
procedures. Failure to complete all pre-dive checks could result in helmet failure due to
problems with the incorrect set-up of the equipment. This could lead to serious person-
al injury or death.
Always read the Material Safety Data Sheet (MSDS) for any chemical - adhesive, clean-
ing agent, or lubricant - used on your Kirby Morgan helmet. Some of these chemicals
may cause serious bodily injury or death if used improperly or without the proper per-
sonal protective equipment.
Whenever KMDSI helmets or masks are used in European Countries, which have adopted the C.E. certification
programs, they must only be used with C.E. certified components. Diving operations should only be conducted within
the limits of the operational specifications, and in accordance with the rules and regulations established by the gov-
erning authority in the specific country or geographical location where the diving operations are being conducted. If
you have any questions concerning this manual or the operation of your helmet, contact KMDSI (805) 928-7772 or at
KMDSI@KirbyMorgan.com or Dive Lab Inc. (850) 235-2715 or at Divelab@aol.com
XIV
WARNING
WARNING
© ⅯⅯⅩⅡ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 120613005
Advertisement
Table of Contents
