Table of Contents
Advertisement
This is how the guide strap should look when it is
properly installed (note that yoke/neck clamp is
upside down to allow you to see where the strap
installs).
5) Install the non-adjustable loop on the yoke strap
on the side of the yoke where the latch catch as-
sembly is mounted.
In some cases, it may be necessary to remove the
latch catch to install the loop. Follow the proce-
dures for removal and reinstallation per this chap-
ter.
6) For proper use of the yoke strap, see Chapter 3
of this manual.
Completed installation of the
Yoke Strap
© ⅯⅯⅩⅡ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 120613005
Installation of the non-adjustable loop on the yoke
strap.
®
SuperLite
17B
127
Advertisement
Table of Contents
