5. IMAGE EDITING
Trimming/Masking
You can select an area on an original and copy it with the area trimmed (only the inside of the area copied)
1
or masked (only the outside of the area copied). Four rectangular areas can be specified on an original.
* Image editing is only possible with standard sized originals.
* If the settings of the original and copy sizes are not made appropriately, the image may not be copied
completely.
2
3
4
1
Place paper in the drawer(s).
5
- When using this mode in bypass copying , be sure to specify
the paper size.
2
Press the EDIT key to enter the edit menu, and
6
press the EDITING key.
7
8
3
Press the TRIM (or MASK ) key.
9
10
11
12
4-8
USING THE EDITING FUNCTIONS
Page 2-4
Page 5-10, 5-11
Trimming
Masking