Toshiba e-studio550 Operator's Manual page 81

12. TAB PAPER MODE(Cont.)
2 Press the TAB EXTENSION key.
1
2
3
3
Press the CASSETTE key (or the BYPASS FEED
key), then adjust the tab extension (tab width) and
4
the shift width then press the SET key.
- Adjust the tab width and the shift width by means of the
0mm key and the 30mm
5
Unless the tab width has refreshed, the previous value is valid.
The initial settings are set to 13mm for the tab width and the
6
shift width.
The range of the tabwidth/the shiftwidth
7
Drawer
Bypass
8
Measuring the tab width/the shift width
The tab width and the shift width can be measured on the original
glass. Place tab paper for measuring the tab width and place original
for measuring the shift width on the original glass as indicated on the
9
right. The marks of the original scale have a 2mm pitch.
- Measuring the tab width (Place tab paper)
10
11
- Measuring the shift width (Place original)
12
4-24
USING THE EDITING FUNCTIONS
key.
Tab width Shift width
12 to 17mm 0 to 30mm
10 to 20mm 0 to 30mm
Tab width
Original scale
Align the tab paper with
the original scale
Shift width
Original scale
Align the original with
the original scale