Toshiba e-studio550 Operator's Manual page 37

3. SETTING ORIGINALS (Cont.)
When Using the Reversing Automatic Document Feeder (Cont.)
In the Continuous Feed Mode
1
- Be sure to set only originals with the same width. Mixed-sized originals
1 After aligning the edges of originals well, place
2
them face up and align the slides to the width of
the originals.
- Align the originals in the order from the top because they will
be fed from the top.
3
- One original sheet is also acceptable.
- Maximum number of sheets (all sizes) can be set in the
reversing automatic document feeder: 100 sheets (80g/m
or less than 16mm in height.
4
When the number of originals is too large to be set at one time,
5
you can divide the originals into two to ten sets and set them
one after another. To do so, place the first set of originals first,
and press the CONTINUE key while the scanning is in
progress. After they have been scanned, place the previous
6
set of originals.
7
In the Single-feed Mode
1
Align the slides to the desired original size.
8
9
10
2 Insert the original face up and straight along the
slides; it will then be pulled in automatically.
11
- When the original starts being pulled in, let go of it.
12
2-12
HOW TO MAKE COPIES
Page 5-2
2 )
Page 5-3
Page 5-4
Slide
Slide