7. DELETING OR CHANGING ORDER OF PENDING JOBS
If data is waiting to be printed, you can delete them or change the printing order.
1
2
In the following procedure, you can delete the a multicopying operation as well.
1
Press the JOB STATUS key on the control panel,
3
then the JOB LIST key on the touch panel.
4
The menu on the right shows an example of the queue.
5
2
Select the job you want to delete, then press the
DELETE key.
6
7
3
Press the Delete key.
8
9
10
4
The job will be deleted.
11
Press the JOB STATUS key on the control panel to return the
basic screen (before JOB STATUS key is pressed on the step
12
1). If there is no job waiting to be printed, you can also return to
the basic screen by pressing the RETURN key on the touch
panel.
2-16
HOW TO MAKE COPIES
Deleting the Job