Auto Job Start (Job Preset) - Toshiba e-studio550 Operator's Manual

4. AUTO JOB START (JOB PRESET)

While multi-copying is in process, you can reserve the next copy.
1 Place the original(s).
Select copy modes as required.
2
Press the START key.
- Up to 5 jobs including the current printing job can be stored
in the memory. Place the originals of the 6th job on the
original glass or the reversing automatic document feeder
and press the
appear:
Auto Start
Confirming and Cancelling Auto Job Start
Confirming auto job start
Press the JOB STATUS key on the control panel, then
the JOB LIST key on the touch panel.
Cancelling the job while waiting for the original to be stored in
the memory.
If you want to cancel copying the original when it has already
been set on the glass or the reversing automatic document feeder
and the following message is displayed:
Auto Start
press the FUNCTION CLEAR or the
Cancelling the job while waiting for the original to be copied.
Deleting the data waiting to be printed (except for the case above)
Page 2-15
Page 2-9
START key. The following message will
STOP key.
1
2
3
4
5
6
7
8
9
10
11
12
2-13