Paper Selection; Automatic Paper Selection (Aps) - Toshiba e-studio550 Operator's Manual

1. PAPER SELECTION

Automatic Paper Selection (APS)

When you place regular-sized originals on the glass or in the reversing automatic document feeder, the
1
built-in sensors automatically work to detect the size of the originals, helping the copier select and copy on
paper that is the same size as the original.
* Depending on the condition of the original, automatic paper selection may not work correctly. In that case,
select the paper size manually.
* This mode can only be used for actual-size (100%) copying.
2
* Original sizes capable of automatic detection
3
1 Place paper in the drawer(s).
2
Place the original(s).
4
3 Confirm that the Automatic Paper Selection mode
(default setting) is selected on the basic screen.
5
6
7
- If the Automatic Paper Selection mode is not selected, press
the ZOOM··· key, then press the APS key on the next
screen.
- If the following messages are shown, proceed as directed:
8
Change direction of original
9
Set correct drawer
10
When the selected drawer size and the original size are the
same, the copier rotates the original data 90° and makes a copy
in the same size as the original even if those directions differ
11
(e.g. an A4-size original is set while the same size paper is set
in R direction). This function, however, is applicable to plain
paper only.
12
Select other copy modes as required.
4
Press the
3-2
SETTING OF BASIC COPY MODES
Page 3-3
Page 2-4
Page 2-9
START key.
Page 2-9