4. CLEAR PAPER
8
Pull the transfer unit out until it comes to a stop.
1
2
3
- If a sheet of paper is misfed on the transfer belt, remove it.
4
- Do not put some objects on the transfer belt or do not touch it.
- When a sheet of paper is caught in fuser unit, do not pull out
directly but remove based on step 9.
5
9
Lift the grip, then turn the knob in the direction of
6
the arrow to remove any misfed paper.
Caution
7
Do not touch the fuser unit and around the metal area. You
may be burned or be injured if you come into contact with the
inner area in the fuser due to high temperature.
8
10
Pick the lever of the transfer unit as shown on the
right and open the bottom (automatic duplexer).
9
10
11
11
Remove any misfed paper.
12
7-14
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
SYMBOL (Cont.)
Fuser unit
Metal area