Panasonic KX-NS1000 User Manual page 49

Leaving a Message Waiting Indication/Calling Back the Caller Who Left
an Indication (Message Waiting)
For an extension leaving a message waiting indication
When the called extension is busy or does not answer your call, you
can leave a notification so that the called party may call you back.
For an extension receiving a message waiting indication
As a message receiver, the Message button light or Message/Ringer
Lamp lets you know that a call has been received. If you receive
notification, you can call the caller back by a simple operation.
Note
SIP extensions (except the KX-UT series) cannot receive message
waiting indications.
For an extension leaving a message waiting indication
To leave a message waiting indication
PT/SLT/PS
When the called extension is busy or does not answer
OR
4
Press MESSAGE
or enter 4.
To leave/cancel a message waiting indication
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
C.Tone
On-hook.
7 0
70. Enter 1 to leave
Enter
or 0 to cancel.
1.2.4 When the Dialled Line is Busy or There is No Answer
1
Leave
desired
OR
extension no.
0
Cancel
Enter desired
extension number.
C.Tone
On-hook.
User Manual 49