Panasonic KX-NS1000 User Manual page 32

1.1.5 Before Operating the Telephones
Button
Message for Another
Extension
Call Forwarding (FWD)/Do
Not Disturb (DND)—Both
calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Group FWD—Both calls
Group FWD—Outside calls
Group FWD—Intercom calls
Account
Conference
Terminate
External Feature Access
(EFA)
Call Charge Reference
Call Park
Call Park (Automatic Park
Zone)
Call Log
Call Log for ICD Group
Log-in/Log-out
Log-in/Log-out of a specified
group
Log-in/Log-out for all groups
Hurry-up
Wrap-up
System Alarm
Time Service (Day/Night/
Lunch/Break)
Answer
Release
32 User Manual
Used to have a Message button for another extension.
Used to forward all calls to a specified destination or refuse.
Used to forward outside calls to a specified destination or refuse.
Used to forward intercom calls to a specified destination or refuse.
Used to forward all the calls to your group to a specified destination.
Used to forward the outside calls to your group to a specified destination.
Used to forward the intercom calls to your group to a specified destination.
Used to enter an account code.
Used to establish a multiple party conversation.
Used to disconnect the current call and make another call without hanging
up.
Used to access special features offered by a host PBX or a telephone
company.
Used to check the total call charge for your own extension.
Used to park or retrieve a call in a preset parking zone.
Used to park a call in an idle parking zone automatically.
For KX-UT series SIP phones (except KX-UT113/KX-UT123) and S-PSs,
pressing this button selects an idle parking zone from among the Call Park
(preset parking zone) buttons configured on the phone.
Used to show the incoming call information.
Used to have a Call Log button for incoming call distribution group.
Used to switch between the log-in and log-out mode.
Used to have a Log-in/Log-out button for another incoming call distribution
group.
Used to have a Log-in/Log-out button for all groups.
Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.
Used to switch the wrap-up status, Ready and Not Ready mode.
Used to confirm a PBX error.
Used to switch the time service mode.
Used to answer an incoming call.
Used to disconnect the line during or after a conversation or to complete
a Call Transfer.
Feature