Accessing Camera Controls / Settings - Red Epic Epic-M Operation Manual

POWER DOWN
USING CAMERA
When the REDmote is connected to the camera and the camera is powered down, the REDmote will
also power down. When disconnected from the camera, the REDmote will not power down with the
camera.
USING REDMOTE
1. To power DOWN the REDmote, depress and hold the Power / Lock Switch in the Down direction
momentarily, then release.
2. A screen will display with options to power down the REDmote, the camera or both the REDmote
AND the camera together.
3. Select the desired power down function.
NOTE: When not using the REDmote, for maximum battery storage life, use the Power / Lock
Switch to power down the REDmote completely by pressing down in the power off position and
using the displayed menu to shut down the REDmote and/or the REDmote and camera. Refer to
POWER UP / DOWN > POWER DOWN. If the Power / Lock Switch is pressed down in the power
off position and held until the REDmote powers down, the battery storage life will be reduced
greatly as there will be a slight power draw on the REDmote when shut down using this
procedure.

ACCESSING CAMERA CONTROLS / SETTINGS

The Navigation Group is used to navigate through the camera's menus. Refer to CAMERA
OPERATIONAL CONTROLS > REDMOTE > NAVIGATION GROUP. The camera settings and status are
displayed on the REDmote Color LED display. Refer to BASIC OPERATION > GRAPHICAL USER
INTERFACE AND NAVIGATION > REDMOTE.
The operations will be the same whether connected physically to the camera, or wirelessly.
Version 1.6.46
NOVEMBER 17, 2011 ©2011 RED.COM INC.
161