Electrical Connection - Baumatic BHI625 Instruction Manual

o Carefully lower the hob into the aperture hole that you have cut
out.
o There are holes on the base of the hob that you can fix the
brackets to.

Electrical connection

This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulations and in compliance with Baumatic's
instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance must be wired into a 30A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
You should place the bracket
on the underneath of the hob,
in a position
appropriate for the aperture
that you have cut out. Using
the screws provided, fix the
bracket to the hob. These
screws MUST
tightened.
27
that is
be securely