Switching The Hob Off; Residual Heat Indicator; Pan Sensor - Baumatic BHI625 Instruction Manual

Switching the hob off

Once you have switched off all of the cooking zones, you should switch
the hob off.

Residual heat indicator

o After a zone is switched off, the corresponding
o IMPORTANT: The residual heat indicator will disappear if your
mains supply is cut. Care should be taken in case the surface
temperature is still high.

Pan sensor

Each zone has a sensor on it, so it can detect the presence of a pan.
o The sensor is fine-tuned to detect a pan being placed on it. The
pan should be one size smaller than the nominal diameter of the
zone.
Or it could be made from a material that is inappropriate for use
on an induction zone hob.
o If a cooking zone is selected but no pan is detected, the pan
sensor system
o An "H" symbol will show in the cooking zone
indicator until the surface has cooled down to a
safe temperature
"residual heat indicator" for further information).
o Press the ON/OFF button.
o It is possible to turn the hob off at any time by
pressing the ON/OFF button.
cooking zone indicator will show a letter "H". This
means that the temperature of the zone is over
60°C and is therefore still high enough to cause
injury.
o If after placing a pan on a cooking zone and
selecting that cooking zone, a "U" shaped symbol
appears on the cooking zone indicator, this means
that the pan is either the incorrect size or shape.
will check
15
(see the section
for the presence
on the
of a pan