Table of Contents
Advertisement
tiptel VP 28
4) You can also update immediately by pressing Autoprovision Now button.
The parameters of the Auto-provision
Parameter
Update Protocol
TFTP Server
Check new config
Scheduling
Note:
1. Any power interruption during the following process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore. The procedure can
only be conducted in Administrator Mode.
2. If you choose DHCP method , make sure your phone is also chosen DHCP.
3. If you choose the DHCP and URL On, it will choose DHCP at first .
Reboot
To reboot your device via phone interface:
1) Click Setting->Reboot option and enter the password to enter configuration page.
2) It will pop up a warning frame asking you whether to reboot your device. Click
The phone can be updated via TFTP, FTP ,HTTP or HTTPS.
If you choose TFTP as protocol TFTP, you need to enter the TFTP
server IP address and port.
You can specific the period that your phone checks the new
firmware from the server: Power on, Repeatedly, Weekly, Power
on + Repeatedly, Power on + Weekly and Disabled.
You can specific the period in days which the phone checks and
updates the new firmware, the range is 1-30 days.
Description
- 64 -
Trouble Shooting
Advertisement
Table of Contents
