Siemens SINAMICS V20 Inverter Getting Started page 24

Commissioning
4.1 The built-in Basic Operator Panel (BOP)
Starts the inverter
If the inverter is started in HAND / JOG mode, the inverter running icon (
Note:
This button is inactive if the inverter is configured for control from terminals (P0700 = 2, P1000 = 2) and
is in AUTO mode.
Multi-function button
M M
Short press ( < 2 s)
Long press ( > 2 s)
Short press ( < 2 s)
OK OK
Long press ( > 2 s)
Hand / Jog / Auto
M M OK OK
Press to switch between different modes:
+
Note:
Jog mode is only available if the motor is stopped.
When navigating a menu, it moves the selection up through the screens available.
•
When editing a parameter value, it increases the displayed value.
•
When the inverter is in RUN mode, it increases the speed.
•
Long press (> 2 s) of the key quickly scrolls up through parameter numbers, indices, or values.
•
When navigating a menu, it moves the selection down through the screens available.
•
When editing a parameter value, it decreases the displayed value.
•
When the inverter is in RUN mode, it decreases the speed.
•
Long press (> 2 s) of the key quickly scrolls down through parameter numbers, indices, or values.
•
Reverses the direction of rotation of the motor. Pressing the two keys once activates reverse motor
rotation. Pressing the two keys once again deactivates reverse rotation of the motor. The reserve icon (
+
) on the display indicates that the output speed is opposite to the setpoint.
24
•
•
•
•
•
•
•
•
•
M M
Auto mode
(No icon)
Enters the parameter setting menu or moves to the next screen
Restarts the digit by digit editing on the selected item
If pressed twice in digit by digit editing, returns to the previous screen
without changing the item being edited
Returns to the status screen
Enters the setup menu
Switches between status values
Enters edit value mode or change to the next digit
Clears faults
Quick parameter number or value edit
M M
OK OK
OK OK
Hand mode
(With hand icon)
) displays.
M M
OK OK
Jog mode
(With flashing hand icon)
SINAMICS V20 Inverter
Getting Started, 07/2012, A5E03728127