Description Of The Advanced Configuration Settings - TANDBERG C20 Administrator's Manual

Quick Set C20/C20plus
Contents Introduction
Contents Introduction
Description of the Advanced configuration settings
In the following pages you will find a list of the Advanced configuration settings, sorted in alphabetical
order. The examples shows either the default value or an example of a value.
All specifications are subject to change without notice.
We recommend you visit the TANDBERG web site regularly for an updated version of this guide.
Go to: http://www.tandberg.com/docs
xConfiguration Audio SoundsAndAlerts KeyTones Mode:
Determines whether or not the system should produce a sound every time a key on the remote control is
pressed.
On: There will be a sound indicator when pressing keys on the remote control.
Off: The remote control Key Tones is switched off.
Example:
xConfiguration Audio SoundsAndAlerts KeyTones Mode: Off
xConfiguration Audio SoundsAndAlerts RingVolume:
Sets the ring tone volume[0-100] for an incoming call in steps of 0.5dB from -34.5dB to 15dB. Volume 0 =
Off.
Example:
xConfiguration Audio SoundsAndAlerts RingVolume: 50
xConfiguration Audio SoundsAndAlerts RingTone:
Discrete/Fantasy/Jazz/Nordic/Echo/Rhythmic>
Defines the ringtone for incoming calls.
Range: Select a tone from the list of ringtones.
Example:
xConfiguration Audio SoundsAndAlerts RingTone: Jazz
xConfiguration Audio Volume:
<0..100>
Sets the volume level [0-100] on the loudspeaker output in steps of 0.5dB from -34.5dB to 15dB. Volume 0
= Off.
Example:
xConfiguration Audio Volume: 70
xConfiguration Cameras Camera [1..1] Backlight:
Backlight compensates for lights shining directly at the camera (usually sun from the window) to avoid a too
dark image.
On: Turn backlight compensation on.
Off: Turn backlight compensation off.
Example:
xConfiguration Cameras Camera 1 Backlight: Off
D14489.01—JULY 2009
Getting started About the menus
Getting started About the menus
<On/Off>
<0..100>
<Marbles/IceCrystals/Polaris/Alert/
<On/Off>
Advanced settings Settings library
Advanced settings Settings Library Settings library
xConfiguration Cameras Camera [1..1] Brightness Mode:
The camera can adjust the brightness of image automatically, or it can be set manually using the Brightness
Level configuration.
Auto: The camera automatically adjusts brightness level.
Manual: Set brightness level manually with the Brightness Level configuration.
Example:
xConfiguration Cameras Camera 1 Brightness Mode: Auto
xConfiguration Cameras Camera [1..1] Brightness Level:
Set a Brightness Level for the camera. Requires the Brightness Mode to be set to manual.
Range: 1-31
Example:
xConfiguration Cameras Camera 1 Brightness Level: 1
xConfiguration Cameras Camera [1..1] Flip:
Controls vertical orientation of the camera image.
On: When set to On the video on screen is flipped.
Off: Set to Off to display the video on screen the normal way.
Auto: Automatically flips the image if the camera is mounted upside down.
Example:
xConfiguration Cameras Camera 1 Flip: Off
xConfiguration Cameras Camera [1..1] Focus Mode:
The camera can adjust focus automatically, or it can be set manually.
Auto: When moving the camera, autofocus is triggered for the new camera position. After a few seconds it is
turned off to prevent continuous focus adjustments.
Manual: Manual adjustment of focus.
Example:
xConfiguration Cameras Camera 1 Focus Mode: Auto
xConfiguration Cameras Camera [1..1] Gamma Mode:
Gamma correction mode control. Gamma describes the nonlinear relationship between image pixels and
monitor brightness.
Auto: The camera decides which gamma table to use.
Manual: Can be used in severe light conditions. Select gamma table by setting the Gamma Level
configuration.
Example:
xConfiguration Cameras Camera 1 Gamma Mode: Auto
xConfiguration Cameras Camera [1..1] Gamma Level:
Select gamma correction table. Useful in difficult lighting conditions where the brightness configuration does
not provide satisfactory results. Requires the Gamma Mode to be set to Manual.
Range: 0-7
Example:
xConfiguration Cameras Camera 1 Gamma Level: 0
Administrator Guide
Cameras Appendices
Cameras Appendices
<Auto/Manual>
<1..31>
<On/Off/Auto>
<Auto/Manual>
<Auto/Manual>
<0..7>
Contact us
Contact us
25