TANDBERG C20 Administrator's Manual page 33

Quick Set C20/C20plus
Contents Introduction
Contents Introduction
On: Set to On to enable the IR sensor on the codec.
Off: Set to Off to disable the IR sensor on the codec.
Auto: The system will automatically disable the IR sensor on the codec if the IR sensor at camera is enabled.
Otherwise the IR sensor on the codec will be enabled.
Example:
xConfiguration SystemUnit IrSensor Mode: On
xConfiguration SystemUnit MenuLanguage:
Japanese/Korean/Norwegian/Portugese/Russian/Spanish/Swedish>
The setting is used to select the language for the GUI.
Example:
xConfiguration SystemUnit MenuLanguage: English
xConfiguration SystemUnit Name:
Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured on the system
then this ID will be used instead of the system name. The system name will be displayed:
* When the codec is acting as an SNMP Agent
* Towards a DHCP server
Format: String with a maximum of 50 characters.
Example:
xConfiguration SystemUnit Name: "Meeting Room Name"
xConfiguration Time DateFormat:
Specifies the date format.
DD_MM_YY: The date January 30th 2009 will be displayed: 30.01.09
MM_DD_YY: The date January 30th 2009 will be displayed: 01.30.09
YY_MM_DD: The date January 30th 2009 will be displayed: 09.01.30
Example:
xConfiguration Time DateFormat: DD_MM_YY
xConfiguration Time TimeFormat:
Specifies the time format.
24H: Set the time format to 24 hours.
12H: Set the time format to 12 hours (AM/PM).
Example:
xConfiguration Time TimeFormat: 24H
xConfiguration Time Zone:
<GMT-12:00 (International Date Line West)/GMT-11:00 (Midway
Island, Samoa)/GMT-10:00 (Hawaii)/GMT-09:00 (Alaska)/GMT-08:00 (Pacific Time (US &
Canada) Tijuana)/GMT-07:00 (Arizona)/GMT-07:00 (Mountain Time (US & Canada))/GMT-07:00
(Chihuahua, La Paz, Mazatlan)/GMT-06:00 (Central America)/GMT-06:00 (Saskatchewan)/
GMT-06:00 (Guadalajara, Mexico City, Monterrey)/GMT-06:00 (Central Time (US & Canada))/
GMT-05:00 (Indiana (East))/GMT-05:00 (Bogota, Lima, Quito)/GMT-05:00 (Eastern Time
(US & Canada))/GMT-04:30 (Caracas)/GMT-04:00 (La Paz)/GMT-04:00 (Santiago)/GMT-
04:00 (Atlantic Time (Canada))/GMT-03:30 (Newfoundland)/GMT-03:00 (Buenos Aires,
Georgetown)/GMT-03:00 (Greenland)/GMT-03:00 (Brasilia)/GMT-02:00 (Mid-Atlantic)/GMT-
D14489.01—JULY 2009
Getting started About the menus
Getting started About the menus
<Chinese/English/French/German/Italien/
<S: 0, 50>
<DD_MM_YY/MM_DD_YY/YY_MM_DD>
<24H/12H>
Advanced settings Settings library
Advanced settings Settings Library Settings library
01:00 (Cape Verde Is.)/GMT-01:00 (Azores)/GMT (Casablanca, Monrovia)/GMT (Greenwich
Mean Time : Dublin, Edinburgh, Lisbon, London)/GMT+01:00 (West Central Africa)/
GMT+01:00 (Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna)/GMT+01:00 (Brussels,
Copenhagen, Madrid, Paris)/GMT+01:00 (Sarajevo, Skopje, Warsaw, Zagreb)/GMT+01:00
(Belgrade, Bratislava, Budapest, Ljubljana, Prague)/GMT+02:00 (Harare, Pretoria)/GMT+02:00
(Jerusalem)/GMT+02:00 (Athens, Istanbul, Minsk)/GMT+02:00 (Helsinki, Kyiv, Riga, Sofia,
Tallinn, Vilnius)/GMT+02:00 (Cairo)/GMT+02:00 (Bucharest)/GMT+03:00 (Nairobi)/GMT+03:00
(Kuwait, Riyadh)/GMT+03:00 (Moscow, St. Petersburg, Volgograd)/GMT+03:00 (Baghdad)/
GMT+03:30 (Tehran)/GMT+04:00 (Abu Dhabi, Muscat)/GMT+04:00 (Baku, Tbilisi, Yerevan)/
GMT+04:30 (Kabul)/GMT+05:00 (Islamabad, Karachi, Tashkent)/GMT+05:00 (Ekaterinburg)/
GMT+05:30 (Chennai, Kolkata, Mumbai, New Delhi)/GMT+05:45 (Kathmandu)/GMT+06:00
(Sri Jayawardenepura)/GMT+06:00 (Astana, Dhaka)/GMT+06:00 (Almaty, Novosibirsk)/
GMT+06:30 (Rangoon)/GMT+07:00 (Bangkok, Hanoi, Jakarta)/GMT+07:00 (Krasnoyarsk)/
GMT+08:00 (Perth)/GMT+08:00 (Taipei)/GMT+08:00 (Kuala Lumpur, Singapore)/GMT+08:00
(Beijing, Chongqing, Hong Kong, Urumqi)/GMT+08:00 (Irkutsk, Ulaan Bataar)/GMT+09:00
(Osaka, Sapporo, Tokyo)/GMT+09:00 (Seoul)/GMT+09:00 (Yakutsk)/GMT+09:30 (Darwin)/
GMT+09:30 (Adelaide)/GMT+10:00 (Guam, Port Moresby)/GMT+10:00 (Brisbane)/GMT+10:00
(Vladivostok)/GMT+10:00 (Hobart)/GMT+10:00 (Canberra, Melbourne, Sydney)/GMT+11:00
(Magadan, Solomon Is., New Caledonia)/GMT+12:00 (Fiji, Kamchatka, Marshall Is.)/
GMT+12:00 (Auckland, Wellington)/GMT+13:00 (Nuku alofa)>
Specifies the time zone where the system is located, using Windows time zone description format.
Example:
xConfiguration Time Zone: "GMT (Greenwich Mean Time : Dublin,
Edinburgh, Lisbon, London)"
xConfiguration Video DefaultPresentationSource:
Define which video input source shall be used as the default presentation source (e.g. when you press the
Presentation key on the remote control).
Example:
xConfiguration Video DefaultPresentationSource: 2
xConfiguration Video Encoder Threshold60fps:
If the bandwidth used for transmitting video is above or equal to this threshold, the system will select the
highest video resolution possible while maintaining 60 fps. If below this threshold, the system will select the
highest video resolution possible while maintaining 30fps.
NOTE: This setting will only apply when the video input source to be transmitted is a 60fps source, and the
selected video input is configured for motion.
Range: 0-6000 kbps
Example:
xConfiguration Video Encoder Threshold60fps: 2000
xConfiguration Video Input DVI [2] Type:
The official DVI standard supports both digital and analog signals. In most cases the default AutoDetect
setting can detect whether the signal is analog RGB or digital. However, in some rare cases when DVI-I
cables are used (these cables can carry both the analog and digital signals) this detection might fail. This
setting makes it possible to override the AutoDetect and select the correct DVI video input.
This setting should also be used if the video input on the DVI connector is an analog component (YPbPr)
type signal. This is used by some cameras (Sony EVI-HD1) and DVD/Blu-ray players. Since it is not possible
to auto detect the difference between AnalogRGB and AnalogYPbPr, the Analog YPbPr setting has to be
Administrator Guide
Cameras Appendices
Cameras Appendices
<1..2>
<0..6000>
<AutoDetect/Digital/AnalogRGB>
Contact us
Contact us
33