TANDBERG C20 Administrator's Manual page 27

Quick Set C20/C20plus
Contents Introduction
Contents Introduction
xConfiguration Conference [1..1] FarEndControl Mode:
Lets you control if the remote side (far end) should be allowed to select your video sources and control your
local camera (pan, tilt, zoom).
On: Set to On when you want the the far end to be able to select your video sources and control your
local camera (pan, tilt, zoom). You will still be able to control your camera and select your video sources as
normal.
Off: When set to Off the far end can not access any of the features above on your system.
Example:
xConfiguration Conference 1 FarEndControl Mode: On
xConfiguration H323 Profile [1..1] Authentication LoginName:
The system sends the Authentication Login Name and the Authentication Password to a H.323 Gatekeeper
for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper,
i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentication
is required, the system will still try to register. Requires the H.323 Gatekeeper Authentication Mode to be
enabled.
Format: String with a maximum of 50 characters.
Example:
xConfiguration H323 Profile 1 Authentication Loginname: ""
xConfiguration H323 Profile [1..1] Authentication Mode:
On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper indicates
that it requires authentication, the system will try to authenticate itself to the gatekeeper. Requires the
Authentication ID and Authentication Password to be defined on both the codec and the Gatekeeper.
Off: If the H.323 Gatekeeper Authentication Mode is set to Off the system will not try to authenticate itself to
a H.323 Gatekeeper, but will still try a normal registration.
Example:
xConfiguration H323 Profile 1 Authentication Mode: Off
xConfiguration H323 Profile [1..1] Authentication Password:
The system sends the Authentication Login Name and the Authentication Password to a H.323 Gatekeeper
for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper,
i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentication
is required, the system will still try to register. Requires the H.323 Gatekeeper Authentication Mode to be
enabled.
Format: String with a maximum of 50 characters.
Example:
xConfiguration H323 Profile 1 Authentication Password:
xConfiguration H323 Profile [1..1] CallSetup Mode:
The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when establishing H323
calls.
Direct: An IP-address must be used when dialling in order to make the H323 call.
Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this option the H323
Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must also be configured.
NOTE! Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to Gatekeeper.
Example:
xConfiguration H323 Profile 1 CallSetup Mode: Gatekeeper
D14489.01—JULY 2009
Getting started About the menus
Getting started About the menus
<On/Off>
<S: 0, 50>
<On/Off>
<S: 0, 50>
<Direct/Gatekeeper>
Advanced settings Settings library
Advanced settings Settings Library Settings library
xConfiguration H323 Profile [1..1] Gatekeeper Address:
Specifies the IP address of the Gatekeeper. Requires the H.323 Call Setup Mode to be set to Gatekeeper
and the Gatekeeper Discovery to be set to Manual.
Format: String with a maximum of 64 characters.
Example:
xConfiguration H323 Profile 1 Gatekeeper Address: "10.47.1.58"
xConfiguration H323 Profile [1..1] Gatekeeper Discovery:
Determines how the system shall register to a H.323 Gatekeeper.
Manual: The system will use a specific Gatekeeper identified by the Gatekeeper's IP-address.
Auto: The system will automatically try to register to any available Gatekeeper. If a Gatekeeper responds
to the request sent from the codec within 30 seconds this specific Gatekeeper will be used. This requires
that the Gatekeeper is in auto discovery mode as well. If no Gatekeeper responds, the system will not use a
Gatekeeper for making H.323 calls and hence an IP-address must be specified manually.
Example:
xConfiguration H323 Profile 1 Gatekeeper Discovery: Manual
xConfiguration H323 Profile [1..1] H323Alias E164:
The H.323 Alias E.164 defines the address of the system, according to the numbering plan implemented
in the H.323 Gatekeeper. The E.164 alias is equivalent to a telephone number, sometimes combined with
access codes. Example: "9047615901", "550092"
Format: Compact string with a maximum of 30 characters. Valid characters are 0–9, * and #.
Example:
xConfiguration H323 Profile 1 H323Alias E164: ""
xConfiguration H323 Profile [1..1] H323Alias ID:
Lets you specify the H.323 Alias ID which is used to address the system on a H.323 Gatekeeper and will be
displayed in the call lists. Example: "name.surname@company.com", "My H.323 Alias ID"
Format: String with a maximum of 49 characters
Example:
xConfiguration H323 Profile 1 H323Alias ID: ""
xConfiguration H323 Profile [1..1] PortAllocation:
The H.323 Port Allocation setting affects the H.245 port numbers used for H.323 call signalling.
Dynamic: The system will allocate which ports to use when opening a TCP connection. The reason for doing
this is to avoid using the same ports for subsequent calls, as some firewalls consider this as a sign of attack.
When Dynamic is selected, the H.323 ports used are from 11000 to 20999. Once 20999 is reached they
restart again at 11000. For RTP and RTCP media data, the system is using UDP ports in the range 2326 to
2487. Each media channel is using two adjacent ports, ie 2330 and 2331 for RTP and RTCP respectively.
The ports are automatically selected by the system within the given range. Firewall administrators should not
try to deduce which ports are used when, as the allocation schema within the mentioned range may change
without any further notice.
Static: When set to Static the ports are given within a static predefined range [5555–6555].
Example:
xConfiguration H323 Profile 1 PortAllocation: Dynamic
Administrator Guide
Cameras Appendices
Cameras Appendices
<S: 0, 64>
<Manual/Auto>
<S: 0, 30>
<S: 0, 49>
<Dynamic/Static>
Contact us
Contact us
27