Description Of The Advanced Configuration Settings - TANDBERG Codec C90 Administrator's Manual

TANDBERG Codec C90 and Profiles using C90
Contents Contents Introduction Introduction

Description of the advanced configuration settings

In the following pages you will find a complete list of the system settings which are configured
from the Advanced configuration menu. Open the Home menu on screen and go to: Settings >
Advanced > Advanced configuration. The examples shows either the default value or an example
of a value.
The Audio settings
Audio Input HDMI [3, 4] Level
Define the audio level of the HDMI input connector, in steps of 1dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview of the
menu values represented in dB.
Value space: <-24..0>
Range: Select a value from -24 to 0dB.
Example: Audio Input HDMI 3 Level: 0
Audio Input HDMI [3, 4] Mode
Determines whether or not the audio channels on the HDMI input should be enabled. The HDMI input 3
and 4 have two audio channels.
Value space: <On/Off>
On: Enable the audio channels on the HDMI input.
Off: Disable the audio channels on the HDMI input.
Example: Audio Input HDMI 3 Mode: On
Audio Input HDMI [3..4] VideoAssociation MuteOnInactiveVideo
Enable association of a video source to a HDMI audio input.
Value space: <On/Off>
On: A video source is associated, and the audio will be muted if the associated video source is not
displayed.
Off: No video source is associated.
Example: Audio Input HDMI 3 VideoAssociation MuteOnInactiveVideo: Off
Audio Input HDMI [3..4] VideoAssociation VideoInputSource
Select the associated video input source.
Value space: <1/2/3/4/5>
Range: Select one of the five video input sources.
Example: Audio Input HDMI 3 VideoAssociation VideoInputSource: 1
D14635.03—MAY 2010
Advanced config.
Advanced configuration Advanced configuration Password protection Password protection About monitors About monitors Audio matters Audio matters
The Audio settings,
continued...
Audio Input Line [1..4] Equalizer ID
Select the audio input line equalizer ID.
Value space: <1..8>
Range: Select EqualizerID 1 to 8.
Example: Audio Input Line 1 Equalizer ID: 1
Audio Input Line [1..4] Equalizer Mode
Set the audio input line equalizer mode.
Value space: <On/Off>
On: Enable the equalizer for the audio input line.
Off: No equalizer.
Example: Audio Input Line 1 Equalizer Mode: Off
Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo
Enable association of a video source to a Line audio input.
Value space: <On/Off>
On: A video source is associated, and the audio will be muted if the associated video source is not
displayed.
Off: No video source is associated.
Example: Audio Input Line 1 VideoAssociation MuteOnInactiveVideo: Off
Audio Input Line [1..4] VideoAssociation VideoInputSource
Select the associated video input source.
Value space: <1/2/3/4/5>
Range: Select one of the five video input sources.
Example: Audio Input Line 1 VideoAssociation VideoInputSource: 1
Audio Input Line [1..4] Channel
Define whether the Audio Line input is a mono signal or part of a multichannel signal.
Value space: <Left/Right/Mono>
Left: The Audio Line input signal is the left channel of a stereo signal.
Right: The Audio Line input signal is the right channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Example: Audio Input 1 Channel: Left
10
Administrator guide
Appendices Appendices Contact us Contact us
www.tandberg.com