Setting A Menu Password - TANDBERG C20 Administrator's Manual

Quick Set C20/C20plus
Contents Introduction
Contents Introduction
7

Setting a menu password

It is highly recommended to define a password to access the Advanced
menus. Changing these settings may affect the behavior of the system and
should be done by the system administrator.
NOTE! When you define or change a password make sure you save a copy of
the password in a safe place.
How to set the menu password
Navigate to Settings > Advanced > Change password
1. On the remote control, press the # key to toggle between lower or upper
case characters and numbers: abc/ABC/123
2. Enter the password. The password you enter is hidden, as each character
is replaced with a star (*).
3. Navigate to Save to save the changes, or Cancel to leave without saving.
4. Press Home ( ) to exit.
D14489.01—JULY 2009
Getting started About the menus
Getting started Getting started About the menus
Advanced settings Settings library
Advanced settings Settings Library
Administrator Guide
Cameras Appendices
Cameras Appendices
Contact us
Contact us
16