Program Setting Mode - Salus RT500 Instruction Manual

Weekend (SA to SU)
Time: 6:00am
Setpoint Temp: 21°C
Time: 8:00am
Setpoint Temp: 21°C
Time: 4:00pm
Setpoint Temp: 21°C
Time: 6:00pm
Setpoint Temp: 21°C
Time: 10:00pm
Setpoint Temp: 17°C
6
Clock Setting Mode:
• Press and hold SET and SELECT in Normal
mode for 3 seconds to enter Clock setting mode.
Clock, Day-of-Week, and
"SET" are displayed. All
other indicators are
cleared. "Hour" is
flashing to indicate that it
is the selected item to be
adjusted.
• Release SET and SELECT, press or
increase or decrease the "hour" respectively.
• Press and release SELECT, press or
increase or decrease the "minute" respectively.
• Press and release SELECT, press or
the Day of Week from "M" to "SU".
• Press and release SELECT to allow change of
"hour" again.
• Press and hold or for 2 seconds to enter fast
advance in 4Hz.
• Selected item will stop flashing when a key is
pressed. The selected item will flash again once
the key is released.
• Press SET at any time to confirm the setting and
return to normal mode.
• Thermostat will return to normal mode after 15
seconds if no key is pressed, Clock is also
updated with the latest setting.
7

Program Setting Mode:

5-2 days program selected
• 5 different sets of Time and Setpoint temperature
can be set for Weekday or Weekend. Total 10
settings.
• To review or change program, press SET in
Normal mode to enter Program Setting mode.
Program 1 of the Weekday, and "SET PROG" are
displayed. All other indicators are cleared.
"Weekday" is flashing to indicate that it is the
selected item to be adjusted.
to
to
to cycle
• Press or to select the program set for
Weekday/Weekend to be reviewed or adjusted.
• Press SET at any time during program set,
this will immediately return to Normal
mode.
Press SELECT at any time to confirm the s
"Hour" is flashing to indicate that it is the s
item to be adjusted.
• Press SELECT to select the items to be
reviewed or adjusted with the below se
(Program 1) "hour"
(Program 2) "hour"
(Program 3) "hour"
(Program 4) "hour"
(Program 5) "hour"
and then cycle back to (Program 1)
• Press SET at any time to confirm the se
and return for program set selection.
8 9
"minute" Setpoi
"minute" Setpoi
"minute" Setpoi
"minute" Setpoi
"minute" Setpoi