Salus RT500 Instruction Manual page 6

Press SELECT at any time to confirm the selection.
"Hour" is flashing to indicate that it is the selected
item to be adjusted.
• Press SELECT to select the items to be
reviewed or adjusted with the below sequences.
(Program 1) "hour"
(Program 2) "hour"
(Program 3) "hour"
(Program 4) "hour"
(Program 5) "hour"
and then cycle back to (Program 1)
• Press SET at any time to confirm the setting
and return for program set selection.
8 9
7 days program selected
• 5 different sets of Time and Setpoint
temperature can be set for each Day of Week.
Total 35 settings.
• To review or change program, press SET in
Normal mode to enter Program Setting mode.
Program 1 of Monday, and "SET PROG" are
displayed. All other indicators are cleared. "Day
of Week" is flashing to indicate that it is the
selected item to be adjusted.
• Press
select the
program set for
"minute" Setpoint temp
Day of Week to
"minute" Setpoint temp
be reviewed or
adjusted.
"minute" Setpoint temp
"minute" Setpoint temp
• Press SET at any time during program set and
selection will immediately return to Normal mode.
"minute" Setpoint temp
• Press SELECT at any time to confirm the selection.
"Hour" is flashing
to indicate that
it is the selected
item to be
adjusted.
• Press "Set" to confirm at anytime to return.
or to
10
5-2 or 7 days program
• The PROG indicator is displa
indicate the program numbe
• Selected item will be flashing
adjusted by or key. Pr
changed in 10 minutes step
temperature range is 10°C -
0.5°C.
• Press and hold or for 2
advance in 4Hz.
• Selected item will stop flashi
pressed. The selected item w
the key is released.
• Thermostat will return to no
seconds of no keys pressed,
stored.
Program review/changes are all
Protection is enabled.
11