Salus RT500 Instruction Manual page 8

Temporary Override:
• Press
Temperature to enter Manual Override mode,
the Setpoint Temperature is increased or
decreased by 0.5°C accordingly.
• In Normal mode, press and hold
display the Setpoint temperature. After 2
seconds, the Thermostat will enter Manual
Override mode and start fast advance in 4Hz. If
buttons are released within 2 seconds without
entering Manual Override mode, this is treated
as reviewing Setpoint Temperature only.
• Clock, Day-of-Week, and "SET" are displayed.
All other indicators are cleared.
The Setpoint temperature is flashing to indicate that
it can be changed now.
• Release and press
decrease the manual override Setpoint
temperature by 0.5°C respectively.
• Hold
advance in 4Hz.
12 13
or when reviewing Setpoint
or to
or again to increase or
or for another 2 seconds to enter fast
• The setting range is 10°C - 35°C in steps of
0.5°C.
• Setpoint Temperature will stop flashing when a
key is pressed, then flashes again once the key is
released.
• Press SET at any time to confirm the setting
and return to normal mode.
• Thermostat will return to normal mode after 3-4
seconds if no key is pressed.
Temporary override is effective until next program
time matched, clock or program setting is adjusted,
or after Frost protection.
14 15
Reviewing Setpoint T
• Press or to review the S
temperature.
When any program is running, t
the program Setpoint temperat
indicator displayed.
When operating in Frost protec
will show 5°C with the Frost Pro
displayed.
When operating in Temporary O
LCD will show the temporary Se