Closing The Sunny Mini Central - SMA SUNNY MINI CENTRAL 6000TL Installation Manual

Opening and Closing
7.2 Closing the Sunny Mini Central
1. Secure the cover with six screws and the
corresponding washers.
Tighten the screws in the sequence shown on the
right to a torque of 6 Nm. The toothing of the
washers must face toward the cover.
The Sunny Mini Central accessories kit contains a
spare screw and spare washer.
DANGER!
Danger to life due to live covers!
The grounding of the housing cover is ensured by the toothed washers.
• Fasten the washers for all six screws with the toothing facing toward the cover.
2. Check the DC plug connector for correct polarity
and connect it.
3. Check the Electronic Solar Switch for wear as
described in section 8.2 and insert it until it
audibly clicks into place.
NOTICE!
Manipulating the connector in the handle can damage the Electronic Solar
Switch!
The connector must remain moveable inside the handle to ensure proper contact.
Tightening the screws voids all warranty claims and creates a fire risk.
• Do not tighten the connector screw in the Electronic Solar Switch handle.
48 SMC6-8TL-IEN093231
SMA Solar Technology AG
5
4
1
2
3
6
Installation Guide