SECTION 2 -
CONTROLS&FEATURES
IGNITION SWITCH
To operate the ignition switch and it
"
" Position:
All electrical circuits are off. The engine will not
start or run.
"
" Position:
The ignition circuit is "ON" and engine can now be
started. The key can not be removed from the
ignition switch in this position.
"
" Position:
To lock the steering, turn the handlebar all the way
to the left, push down and turn the key to the "
position and remove the key. All electrical circuits
are off.
"
" Position:
To open the fuel filler cap, turn the key to the "
position. Make sure that the key is at the "
position when starting the engine.
s functions:
'
"
"
"
7