Section 2-Controls & Features; Ignition Switch - KYMCO LIKE 150i Owner's Manual

SECTION 2 - CONTROLS&FEATURES

IGNITION SWITCH

To operate the ignition switch and it
" " Position:
All electrical circuits are off. The engine will not
start or run.
" " Position:
The ignition circuit is "ON" and engine can be
started. The key can't be removed from the
ignition switch in this position.
" " Position:
To lock the steering, turn the handlebar all the way
to the left, push down and turn the key to the "
position and remove the key. All electrical circuits
are off.
" " Position:
With the ignition key at the "
engine is running), push the key in and turn it
counterclockwise from "
8
s functions:
'
" position (the
" to the " " position.
With the ignition key in the "
engine is not running), turn the counterclockwise
from the " " to the "
With the ignition key in the "
the key counterclockwise from "
position.Pull up on the back portion of the seat
to lift it up.
"
" position (the
" position.
" position, turn
" to" "