SECTION 2 - CONTROLS&FEATURES
IGNITION SWITCH
Use the ignition key to operate the ignition
switch, the steering lock and open the fuel
filler cap:
" ON " Position:
1
The ignition circuit is "ON" and engine can now be
started. The key can not be removed from the
ignition switch in this position.
2
" OFF " Position:
All electrical circuits are off. The engine
or be started .
" LOCK " Position:
3
To lock the steering, turn the handlebar all the way
to the left, push down and turn the key to the
"LOCK " position and remove the key. All electrical
circuits are off.
CAUTION
After locking the ignition switch, turn the
handlebar gently to confirm that the
steering is locked.
8
can't run
Do not turn the ignition switch to the
lock position when riding, as this could
cause the steering to lock and result
in you losing control of your scooter.
Do not park your scooter in a position
that will interfere with vehicle or
pedestrian traffic.
WARNING