Department Name Programming - TEC MA-600 Series Programming Manual

6. TERMINAL FILE PROGRAMMING
6.9

Department Name Programming

A maximum of 16 characters of department name is programmed here.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [↓] then [Enter].
Depress [2] or [Enter] key.
Select a department of which name is
to be programmed with the [↑] or [↓]
Input a department name.
NOTE: A maximum of 16 one-byte characters or 8 two-byte characters can be entered. A combination of
both types is also available.
Main Menu
or
Depress [2].
key.
[Enter]
[Enter]
[End]
ECR is being outside a sale and in SET mode.
"2 NAMES" for various name programming is selected.
"1 DP KEY NAME" is selected.
The department name already programmed is displayed.
The ECR enters character input mode.
A maximum of 16 one-byte or 8 two-byte characters are input.
The department name is entered and printed.
This programming is ended.
display returns to Main Menu screen.
6-59
EO3-11106
6.9 Department Name Programming
A long receipt is issued and the