Department Table Programming (Submode 3) - TEC MA-1595-1 Series Owner's Manual

6. PROGRAMMING OPERATIONS
6.6

Department Table Programming (Submode 3)

For each department, memory opening, department name and various statuses settings are performed here.
6.6.1 Programming
CONDITION
OPERATION
As for details of each Address, refer to the
following pages.
3 [X]
Repeat for
any
address
within the
same
dept. by
re-entry
for
correction.
(NOTE 3)
Repeat for
other
departments.
To change the positive/negative status:
After Department and PLU Daily and GT Resets
To change any other programmed data or to newly program departments:
Any time outside a sale
Mode Lock: SET
|Address Numbers| [#]
(See NOTE 1.)
Address 1: Link Group
1 [ST]
Address 2: Department Name
2 [ST]
Address 3: Preset Price
3 [ST]
Address 4: Status Code 1
4 [ST]
Address 5: Status Code 2
5 [ST]
Address 6: Tax Status
6 [ST]
Address 7: High Amount Limit
7 [ST]
Address 8: Low Amount Limit
8 [ST]
Address 9: Sub-link Dept. Code
9 [ST]
[AT/TL]
(To complete this submode.)
(See NOTE 2.)
|Department Code|
for sequential-coded Dept. only
|Major GP| |Minor GP| [#]
(01 to 10)
Character Entries
Max. 16 characters
|Price| [#]
(Max. 6 digits)
|Status Codes to ON| [#]
|Status Codes to ON| [#]
|Status Codes| [#]
(Max. 4 digits)
|High Amount to be locked out| [#]
|Low Amount to be locked out| [#]
|Sub-link Dept. Code| [#]
6-13
6.6 PLU Table Programming (Submode 4)
[DEPT]
[DP#]
(01 to 30)
(Max.7 digits)
(Max.7 digits)
(1 to 99)
EO1-11152
[ST]