TEC MA-600 Series Programming Manual page 82

6. TERMINAL FILE PROGRAMMING
Operation
Depress the [2] or [Enter] key.
Depress the [↓] key.
Depress the [2] or [Enter] key.
Depress the [Enter] key.
(Department Group 1 is selected.)
The [C] key depression clears the
department group name already
programmed.
Input a desired name.
The [Enter] key depression results in
that the input name is entered and
displayed.
The [End] key depression allows the
ECR to end this programming.
(continued from the previous page)
LCD Display
6-62
6.10 Department Group Name Programming
Remarks
"2 NAMES" is selected.
The cursor is moved on to "2 DP GROUP
NAME".
"2 DP GROUP NAME" is selected.
When programming a name of another
department group, move the cursor on to a
desired one with the [↓] or [↑] key, then
depress the [Enter] key.
The department group name already
programmed is displayed.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[Dbl] [F] [R] [E] [S] [H] [Enter]
When the [Enter] key is depressed, the
programmed data is printed.
A long receipt is issued and the display
returns to Main Menu screen.
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON #0
GROUP
01 FRESH
EO3-11106
0007 13:19TM