TEC MA-600 Series Programming Manual page 121

6. TERMINAL FILE PROGRAMMING
Operation
Depress the [3] or [Enter] key.
Depress the [1] or [Enter] key.
Depress the [1] or [Enter] key.
Depress the [Enter] key to select
Department 01.
*1: see NOTE below
Input 01 (or 1), then depress the
[Enter] key.
(Department Group No. 01 is set.)
Depress the [Enter] key.
(The open-price is set.)
The [Enter] key depression allows the
ECR to enter Department Status
setting menu.
(continued from the previous page)
LCD Display
(continued on the next page)
6-101
6.19 Department Table Programming
Remarks
"3 DP/PLU" is selected.
"1 DP" is selected.
"1 DP SETTINGS" is selected.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
The [?] key depression results in that the
following guidance message appears on the
LCD display.
EO3-11106