TEC MA-600 Series Programming Manual page 98

6. TERMINAL FILE PROGRAMMING
3) Example
To program the amount mark "€" in Item Code 7: (The amount mark has not been preset as the standard
program data).
Meanwhile, the names of the other items in the Item Code 7 should remain unchanged as the standard
program data (i.e. "@" for Unit Price Symbol and "ITEM" for Sale Item Count Symbol).
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
Depress the [2] or [Enter] key.
Depress the [↓] key six times.
Depress the [7] or [Enter] key.
Depress the [↓] key six times, then
depress the [Enter] key.
(Item code 7 ("@ ITEM ") is selected.)
The [C] key depression clears the print
line item name already programmed.
Input a desired name.
The [Enter] key depression results in
that the input name is entered and
displayed.
LCD Display
(continued on the next page)
6-78
6.15 Print Line Item Name Programming
Remarks
The cursor is moved on to "2 NAMES".
"2 NAMES" is selected.
The cursor is moved on to
"7 PRINT ITEM NAME".
"7 PRINT ITEM NAME" is selected.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
The print line item name already
programmed is displayed.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
400[#] 900[#] [I] [T] [E] [M] [→] [Enter]
When the [Enter] key is depressed, the
programmed data is printed.
EO3-11106