Plu Name Programming - TEC MA-600 Series Programming Manual

6. TERMINAL FILE PROGRAMMING
6.12

PLU Name Programming

A maximum of 16 characters of PLU name is programmed here.
CONDITION Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [↓] then [Enter].
Depress the [↓] key three times then
Select a PLU of which name is to be
programmed with the [↑] or [↓] key.
NOTE: A maximum of 16 one-byte characters or 8 two-byte characters can be entered. A combination of
both types is also available.
3) Example
To program "Tomato" as the name of PLU Code No. 0001.
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key.
Main Menu
or
Depress [2].
[Enter].
or
Depress [4].
[Enter]
Input a PLU name.
[Enter]
[End]
(continued on the next page)
ECR is being outside a sale and in SET mode.
"2 NAMES" for various name programming is selected.
"4 PLU (ITEM NO.) NAME" is selected.
The PLU name already programmed is displayed.
The ECR enters character input mode.
A maximum of 16 one-byte or 8 two-byte characters are input.
The PLU name is entered and printed.
This programming is ended.
display returns to Main Menu screen.
LCD Display
6-66
6.12 PLU Name Programming
A long receipt is issued and the
Remarks
The cursor is moved on to "2 NAMES".
EO3-11106