TEC MA-600 Series Programming Manual page 17

4. SYSTEM START-UP PROCEDURE
PC Transmission Information Setting
Data transmission information setting with a PC connection is performed here.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: BLIND
68 [X]
NOTE: When performing the key operation of 68 [X] [AT/TL], a receipt containing the currently programmed
values is issued.
Example) To set the following values;
•
POL Watch Timer:
•
Response Watch Timer:
•
Transmission Delay Timer:
•
Transmission Delay Timer 2:
Key Operation: Mode Lock: BLIND, enter 68, depress [X].
1 [ST] 30 [#]
2 [ST] 20 [#]
3 [ST] 4 [#]
4 [ST] 25 [#]
[AT/TL]
1 [ST]
2 [ST]
3 [ST]
4 [ST]
[AT/TL]
30 (sec)
20 (sec)
4 (80 ms)
25 (500 ms)
POL Watch Timer
Response Watch Timer
Transmission Delay Timer
Transmission Delay Timer 2
To complete this setting
| POL Watch Timer | [#]
Max. 2 digits: 0 to 99
(Standard: 20 sec.)
| Response Watch Timer | [#]
Max. 2 digits: 0 to 99
(Standard: 20 sec.)
| Transmission Delay Timer | [#]
Max. 2 digits: 0 to 99
(1 = 20 ms)
(Standard: 3 = 60 ms)
| Transmission Delay Timer 2 | [#]
2 digits: 15 to 99
(1 = 20 ms)
(Standard: 25 = 500 ms)
4- 2
4. SYSTEM START-UP PROCEDURE
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
31-10-2005 MON #3001
PC COM.
#1
#2
#3
#4
0077 16:50TM
EO3-11106
30
20
4
25