Cashier Code And Name Programming (Submode 2); Cashier Code And Name Programming - TEC MA-1450-1 Series Owner's Manual

6. PROGRAMMING OPERATIONS
6.7

CASHIER CODE AND NAME PROGRAMMING (Submode 2)

Programming
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
2 [@/FOR]
Submode
For Address 1: Cashier Name
No.
For Address 2: Cashier Status
Repeat for
another
Cashier.
[AT/TL]
NOTES: 1. The following table shows the Cashier Codes that can be entered. (The capacity is determined
by the RAM Allocation Setting.) However, the actual maximum number of the cashiers are
preprogrammed. Therefore, ask your TOSHIBA TEC representative for further information.
Cashier
Key Type
* The Cashier Code 99 for the Cashier Key Type is fixed as a code of a cashier for Training Entries.
2. For the name of each cashier, a maximum of 12 regular-sized or 6 double-sized characters can
be entered. A combination of both types is also available. (At least one character must be
entered here.)
|Cashier Code| [NS]
(See NOTE 1 below.)
1 [ST] Character Entries
(max.12 characters)
2 [ST]
Code Entry Type
Push-stay
[CLK] key
6.7 CASHIER CODE AND NAME PROGRAMMING (Submode 2)
[ST]
|Cashier Status| [#]
0: Cashier for Sale Entries
1: Cashier for Training Entries
For sequentially programming the
address, the Address number
specification can be skipped.
1 to 10
1 to 4, 99*
1 to 8, 99*
6-11
EO1-11095